SJT | Scientific Journal of Technology
← Back to Volume 4, Issue 10

Simplified Methodology Research for Parameter Setting of Resistance Spot Welding

Xuefeng Wang
Vol. 4, No. 10, pp. 1-6, 2022 DOI: 10.54691/sjt.v4i10.2369 October 23, 2022
Download PDF
Abstract.The research is explored an efficient methodology in parameter setting for RSW (resistance spot welding). The methodology mainly focusses on weld cycles and weld current, which has included a process for parameter selection, performance evaluation, and failure mode analysis. Effects on welding resistance caused by various technical parameters. Relationship between weld cycles, weld current and the mechanical performance will be established by simplified model. Also, the parameter setting of welding operation, inspection methods, failure modes and control system will be discussed in the following content. This methodology will lead to higher efficiency and optimized quality during for manufacture parameter determination in sample A round before massive production. A proper resistance spot welding will be more economical engineering method for joints in the industry.
Keywords. Resistance Spot Welding; Parameter Setting; New Engineering Method.
APA Citation Xuefeng Wang (2022). Simplified Methodology Research for Parameter Setting of Resistance Spot Welding. Scientific Journal of Technology, 4(10), 1-6. https://doi.org/10.54691/sjt.v4i10.2369

References

  1. Nikoosohbat, F. & Kheirandish, S. & Goodarzi, Massoud & Pouranvari, Majid & Marashi, Pirooz. (2010). Microstructure and failure behaviour of resistance spot welded DP980 dual phase steel. Materials Science and Technology. 26. 738-744. 10.1179/174328409X414995.
  2. Biro, Elliot & McDermid, Joseph & Embury, J. & Zhou, Yixiang. (2010). Softening Kinetics in the Subcritical Heat-Affected Zone of Dual-Phase Steel Welds. Metallurgical and Materials Transactions A. 41. 2348-2356. 10.1007/s11661-010-0323-2.
  3. najafi birgani, Ebrahim & Pouranvari, Majid. (2022). EFFECT OF MARTENSITE VOLUME FRACTION ON THE WORK HARDENING BEHAVIOR OF DUAL PHASE STEELS.
  4. Azzouzi, D., Benkhedda, Y. & Boumeddane, B. Parametric study of the nugget growth in spot welding of 304L stainless steel sheets having equal and unequal thicknesses. SN Appl. Sci. 1, 626 (2019). https://doi.org/10.1007/s42452-019-0655-5.
  5. Y. -J. Xia, Z. -W. Su, M. Lou, Y. -B. Li and B. E. Carlson, "Online Precision Measurement of Weld Indentation in Resistance Spot Welding Using Servo Gun," in IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 7, pp. 4465-4475, July 2020, doi: 10.1109/TIM.2019.2943981.